|
Rod Lens
| Rod
Lens is designed for use in a variety of
laser and imaging applications. The addition of this product line is
part of a continued effort to support current trends toward
miniaturization. |
General Specifications |
Parameter |
Commercial Grade |
Substrate Material |
BK7 grade A optical glass, Fused Silica,
Sapphire etc. |
Diameter Tolerance |
+0/-0.05mm, Up to +0/-0.002mm |
Surface Quality |
60-40 S/D, Up to 10-5 S/D |
Cylindrical Surface Accuracy |
2¦Ë @632.8nm(Standard), Up to ¦Ë/4
@632.8nm |
Coating |
Uncoated |
BK7 Rod Lenses Standard products:
Part No. |
¦µ(mm) |
L(mm) |
Surface Quality |
ORL0101 |
1.0 |
10.0 |
40-20 |
ORL0102 |
2.0 |
10.0 |
40-20 |
ORL0103 |
3.0 |
10.0 |
40-20 |
ORL0104 |
4.0 |
10.0 |
40-20 |
ORL0105 |
5.0 |
10.0 |
40-20 |
ORL0106 |
6.0 |
15.0 |
40-20 |
ORL0108 |
8.0 |
15.0 |
40-20 |
ORL0112 |
12.7 |
20.0 |
60-40 |
ORL0125 |
25.4 |
30.0 |
60-40 |
Fused Silica Rod Lenses Standard products:
Part No. |
¦µ(mm) |
L(mm) |
Surface Quality |
ORL1103 |
3.0 |
10.0 |
40-20 |
ORL1104 |
4.0 |
10.0 |
40-20 |
ORL1105 |
5.0 |
10.0 |
40-20 |
ORL1106 |
6.0 |
10.0 |
40-20 |
Note: Ohter material Rod Lenses, End Surfaces Polishing or coating are upon requirement.
The general
tolerance specifications above provide a guideline regarding
manufacturing capabilities for optics ranging in size Diameter: ¦Õ1
---30mm, Length: 10-100mm. The manufacturing limits are not
absolute; tighter tolerances may be possible. Part specific
tolerances may vary depending on component size, shape, and/or
material. |
|
